QUICKSAFE 1000
Click photos to enlarge

    

		Thank you . . . for using the IDC QuickSafe!  You have chosen one of the best purpose designed 1 LITRE medical waste collection containers available in Australia. This container comes to you fully assembled - with lid fitted and Final Closure (red in colour) attached.

How to . . .

TEMPORARILY CLOSE the QuickSafe when the waste container is partly filled?
Press the FRONT END (tag end) ONLY of the Final Closure into the LID aperture of the container. This will result in the Final Closure locking into position and temporarily sealing the QuickSafe. When additional use of the container is required, simply pull firmly on the Final Closure TAG to again open and use the QuickSafe.

Final Closure. . .
When your QuickSafe is filled, or ready for disposal simply click the Final Closure into place (Directly into the Lid ). You should please ensure that the Closure seats firmly into the circumference of the lid aperture. Fitting the Final Closure readies the container for proper disposal according to regional regulations and requirements.

For your personal protection and the safety of others using the same container...
Please remember that:

Polymer products, although puncture resistant, are not entirely puncture proof. Always follow the guidelines set down by the Infection Control Association. Never fill a container above the indicator line. Never force an article into a Disposal Safe. Never, ever deposit syringes with the needle pointing upwards.